Every industry uses specialist products that require the very best care and attention in order to manufacture at their optimum. A machine that doesn't work to its best performance represents lost money and, in some cases, a significant cost. This is recognised in TOTAL's range of industrial lubricants, which have all been specially designed for the many thousands of applications used in industry today.
The TOTAL range is the result of many years' research and development and is used and trusted by some of the most respected and successful companies throughout the world.
| Circulating oil |
CIRKAN C
Total loss oils (can, wick, mist) or in casing for movements, joints, bearings, chains or gears under very mild conditions.
CIRKAN ZS
Movements and mechanical systems under severe conditions: good anti-wear properties and resistance to oxidation. |
| Compressor oil |
DACNIS SE
Di-ester based synthetic oils for air compressors (reciprocating high pressure, rotary according to specific OEM recommendation, turbo compressors). High thermal stability.
DACNIS SH
PAO based synthetic oils for rotary air compressors. Long drain intervals, up to 8000 hours.
DACNIS VS
Mineral oils for rotary air compressors. Long drain intervals, up to 4000 hours. |
| EDM fluid |
EDM 3
Single product to perform all operations for all types of parts, from rough machining to finishing operations. |
| Fire resistant hydraulic oil |
HYDRANSAFE HFC146
Hydraulic circuits requiring a fire-resistant HFC-type fluid (Water/Glycol mixture). Ready-for-use fluids. Used in iron and steel industry, mines, foundries, etc. |
| Gas engine oil |
NATERIA MH
Low ash detergent mineral oil. Suitable for spark ignited engines fed with natural gas.
NATERIA MJ
Medium ash mineral Gas Engine Oil. |
| Grease |
ALTIS EM 2
High temperature high speed polyurea grease. For use in high speed applications operating at high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of extraction fans for hot gas or steam, bearings of dryers, pumps, and all other applications where rotation speeds and temperatures are high. Suitable for extended lubrication intervals or filled for life grease. Operating temperature range from -25°C to +180°C.
ALTIS SH 2
High temperature high speed synthetic polyurea grease. Extreme pressure with outstanding low and high temperature performance. Lubrication intervals or filled for life applications. Operating temperature range from -40°C to +180°C.
CALORIS 2
Bentone based grease. For the lubrication of slow moving mechanisms subjected to very high temperatures. Range of use : 0°C to 180°C and peak temperatures of 200°C.
CERAN WR2
Extreme pressure multi-purpose for lubrication of applications operating in wet conditions in marine and off-shore. Operating temperature range from -25°C to +180°C.
SPECIS SY
Semi-fluid synthetic grease for closed gears. Lubrication of enclosed mechanisms subjected to very high loads including reduction and worm gears
SERIOLA 22, 2100
Lower viscosity product, specified for use where the highest rate of heat transfer is required.
SERIOLA 68
Suitable for most heat transfer systems working at higher temperatures. Higher additive treatment for longer service life under the most severe operating conditions.
SERIOLA D
Heat transfer system flushing oil. To be used for the cleaning of heat transfer oil circuits before draining. |
| Hydraulic oil |
AZOLLA AF
High-quality ashless hydraulic oil designed for the severest industrial applications. Particularly injection moulding machines, presses, hydraulic systems in steel, wood, paper, mechanical or car industries. For use in other equipment systems equipped with fine filtration systems. Particularly in the presence of water.
EQUIVIS XV
Hydraulic equipment having to operate over a very wide temperature range and requiring an anti-wear oil possessing an exceptional viscosity index (V1>260) and very shear resistant. Most particularly suited to applications subjected to low temperatures. |
| Industrial gear oil |
CARTER ENS/EP 700
Exposed gears or in non-watertight casing revolving at low speed. For metal cables and chains. "Coating" type lubricants. Available in aerosol cans.
CARTER EP
Gears in casing irrespective of the loading conditions. Bearings and highly loaded couplings. Oil mist lubrication if an extreme pressure oil is required.
CARTER SH
Synthetic high performance. Gears in casing under high loads and extreme temperatures. Lowering costs by increase in oil-change intervals. Miscible with mineral oils.
CARTER SY
Industrial transmission with a high sliding rate. Worm gears reducers. POLYGLYCOL-base synthetic oil. Reduce wear and engine power consumption. Severe operating conditions: shocks, extreme temperatures. Incompatible with mineral oils and some synthetic oils. Protects equipment from corrosion during shutdown phases.
CARTER VP/CS
Reduction gears under particularly severe conditions of lubrication: extreme loads, hot, wet or cold and corrosive environment. Excellent thermal stability permits extended oil-change interval. Defers of micro-pitting. Protects equipment from corrosion during shutdown phases. |
| Machine tool oil |
DROSERA MS
Machine tool slides and hydraulic circuits. Multi-function oil for lubrication of all machine tool parts (hydraulics, slides, gears). Perfect compatibility with cutting fluids of the TOTAL range. |
| Mould Release Agent |
| Products for every application available. Please call technical helpline on 01977 636222 for recommendations based on specific applications. |
| Neat & Soluble Cutting Oils |
| A wide range of both neat and soluble machine oils are available. Please call technical helpline on 01977 636222 for recommendations based on specific applications. |
| Process oil |
TORILLIS
A range of pure mineral oils used in a variety of industries: rubber, plastics, textiles. Available in a wide range of viscosities. Please call technical helpline on 01977 636222 for recommendations based on specific applications. |
| Refrigerator compressor oil |
LUNARIA MP
Super refined naphthenic oils selected for the lubrication of rotary and reciprocating refrigerating compressors using NH3, CFC’s and HCFC’s.
LUNARIA SH
Semi-synthetic (PAO) oils for ammonia refrigerating compressors, with evaporator temperature down to -50°C. Product specially resistant to ammonia. Refrigerating gas: NH3.
PLANETELF ACD 68
Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.
PLANETELF PAG 488
Synthetic PAG type lubricant for car air conditioning. |
| Speciality products |
CORTIS SHT 200
High-performance synthetic fluid. Movements operating at temperatures up to 270°C on a continuous basis. Roller chains rolling elements, rollers, conveyors, cams used in ovens or stoves. Feeder machine mechanisms for glass manufacture. Machines for continuous manufacture of chipboards.
CYL C
Lubrication of steam engine cylinders. Compounded viscous mineral oils. Medium loaded reduction gears.
PNEUMA SY
Anti-freeze oil for drilling air tools, specially for sound proof pneumatic tools. This oil cannot be mixed with conventional mineral oils. |
| Transformer switchgear oils |
ISOVOLTINE
Transformers, switch gears, contacts, welding sets and high voltage equipment. |
| Turbine oil |
PRESLIA
Mineral oil designated for the lubrication of turbines, (steam, gas, combined cycle). Turbo-compressors lubrication.
PRESLIA GT
Hydro-cracked lubricant with outstanding antioxidant properties for gas and combined cycle turbines.
PRESLIA SE JET
Synthetic oil for industrial gas turbines in land and marine applications. |
top of page 
bookmark this page 
print page
